Tm630s Manual - Sinotimer

While holding the button, press M+ to adjust the current minutes.

The internal CR2450 backup battery is dead. Open the battery compartment on the back or side to replace it.

If you want the timer OFF for a week (Christmas vacation): sinotimer tm630s manual

All models share the same core programming logic and relay output, but their power input terminals differ, so always refer to your specific model's wiring diagram.

Hold down the Clock button and press the S+ button to sync the seconds. Programming On/Off Cycles The TM630S allows you to schedule up to 28 On/Off programs. Step 1: Access Program Mode While holding the button, press M+ to adjust

Switches the output mode between ON, AUTO, and OFF. It also selects which channel you are programming.

Connect your "Hot" and "Neutral" wires to the Input terminals (usually marked 1 and 2). If you want the timer OFF for a

Before programming any on/off cycles, you must synchronize the timer's internal clock with your local time.

18;write_to_target_document1a;_EZTsacnqGMPJkPIPssqmyQk_20;56; 0;fe6;0;5d7; To set up your Sinotimer TM630S0;67;0;bc4; Go to product viewer dialog for this item.

Available in 12V DC, 24V DC, 110V AC, or 220V AC (Verify your specific model's label before wiring).