Resetter Epson L6270

Check the box next to . (If visible, also check the Platen pad counter box). Click the Check button on the bottom right.

WICReset. Download from official site (wic-support.com). Free version diagnoses, paid resets.

To notify the printer that you have refilled the EcoTank tanks, you must manually reset the ink levels through the menu: Maintenance Set Ink Level

Only run the resetter after you have replaced the maintenance box with a new one or emptied and dried the existing one. resetter epson l6270

: Some utilities allow you to reset ink levels electronically without needing to purchase new chipsets, though this is less common for EcoTank models like the L6270 which use manual refilling. Additional Service Functions Diagnostic Tools : Advanced software resetters can read diagnostic reports

However, there is a second counter: the (for internal sponges that cannot be replaced). After roughly 3–4 resets (or 50,000 pages), the internal pads may become completely saturated. At that point, even a resetter won't help until you physically open the printer and replace the internal sponges—a messy, advanced repair.

The Epson L6270 is a workhorse. Treat its counters with respect, and it will print tens of thousands of pages. Reset wisely, not recklessly. Check the box next to

Resetting the internal software counter tells the printer that the ink pads are empty, but .

: Press the resetter against the chip until the LED light changes from red to green.

: It is a one-time purchase that can be used multiple times. Important Note WICReset

When the counter hits 100% (usually between 5,000 and 15,000 pages, depending on maintenance), the printer locks down. The screen will show:

Click the button. The software will read the printer's memory and show you the exact percentage of your current ink accumulation. Keep the boxes checked, and click the Initialize button.