Pix-link 300m Firmware Update New! File

[ Start Update ] [ Cancel ]

Disconnect your computer from any active mobile hotspots or primary Wi-Fi networks so it only communicates with the repeater. The Firmware File is Invalid or Rejected

If the repeater becomes unresponsive after a failed update, try a factory reset. Find the small "Reset" button on the device, press and hold it for about 10 seconds while the device is powered on. Pix-link 300m Firmware Update

Changelog for v1.4.2:

Resolving "dead spot" issues and improving signal consistency. [ Start Update ] [ Cancel ] Disconnect

: Once the progress bar finishes, unplug the adapter for 60 seconds and then restore power to finalize the installation. Connection Issues

: Open a web browser and enter the default IP address (usually 192.168.10.1 192.168.7.1 setup.pix-link.net : Enter the default credentials (usually for both username and password). Navigate to Maintenance : Look for the System Tools Maintenance tab in the side menu. Select Firmware Upgrade : Click on the Firmware Update Upload the File Choose File (or "Browse") and select the file you downloaded. Wait for Completion : The device will take 2–5 minutes to install and reboot. Do not power off Changelog for v1

If you own a or repeater, you know it’s a budget-friendly workhorse for extending network coverage or adding Wi-Fi to a desktop PC. However, like any networking device, its factory firmware can become outdated, leading to connection drops, reduced speed, or compatibility issues with modern routers.

What are you trying to fix with this update?