Ensure the ambient temperature stays between -20°C and +60°C. Wiring: Use 1.5mm² to 2.5mm² cables for power terminals. Operating Modes
is a robust, microprocessor-based automatic transfer controller designed for managing engine-generator sets. It provides comprehensive monitoring, control, and protection for emergency power systems, making it a critical component in industrial, commercial, and residential standby applications.
Connect directly to the engine block or the negative terminal of the 12V starter battery. Use a heavy-gauge wire to minimize ground loops.
Before installation, ensure your power supply and environment match the unit's requirements: lovato 31 rgam 12 user manual
This technical guide serves as a comprehensive operational framework for installers, operators, and maintenance technicians handling the Lovato 31 RGAM 12 controller Technical Specifications and Overview The hardware architecture of the 31 RGAM 12
Duration the engine runs without load before shutting down.
The unit automatically detects mains failure, starts the engine, and transfers the load. Ensure the ambient temperature stays between -20°C and
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Configurable inputs for oil pressure, water temperature, and fuel level. 2. Front Panel Layout
Starts the generator under simulated failure conditions to verify operational readiness without dropping the actual building load. ⚙️ Programming and Parameter Tuning and fuel level. 2.
Complete User Guide and Technical Manual for the Lovato 31 RGAM 12 Control Module
The RGAM 12 controller operates in four distinct modes, accessible via the front panel: OFF / RESET