Kyocera M3550idn Default — Password Work
Type using the keypad (Maintenance Item U021 is the memory initialization function) and press the Start button. Select Execute (or All) to initialize the data.
Сервисные пароли Kyocera | БКС (Киосера) - БелКопирСнаб
| Interface / Access Type | Access Level | Username | Password | Notes | | :--- | :--- | :--- | :--- | :--- | | | Administrator | 5000 | 5000 | Used for full system configuration via the printer's touchscreen | | Command Center RX (Web) | Administrator | Admin | Admin | Case-sensitive (capital 'A'). Provides full access to all web-based settings | | Kyocera Net Admin | Administrator | admin | admin | Used for managing the printer via Kyocera's network administration software | | Kyocera Net Admin | Guest (Read-Only) | guest | guest | Allows viewing device status without permission to change settings | kyocera m3550idn default password work
A: The M3550idn is not listed in publicly available documentation for a standard service menu code. Some other Kyocera models use patterns like "Speed + 00" (e.g., 3500 for a 35ppm device) for a service menu, but this does not apply to the M3550idn. For service access, it is best to contact Kyocera professional support.
When typing the printer’s IP address into a web browser to access the Command Center RX, use the following standard credentials: Admin (Note the capital "A") Login Password: Admin (Note the capital "A") Type using the keypad (Maintenance Item U021 is
(capital "A")
On the printer control panel, press the Device Information button or print a status page to locate the machine's current IP address (e.g., 192.168.1.150 ). Provides full access to all web-based settings |
Steps to regain access (prescriptive)
On the printer’s physical screen, press the Device Information or Status key to find the assigned IPv4 address (e.g., 192.168.1.150 ).
On newer Kyocera devices or those with updated firmware, you may be forced to change the default password during initial setup. If "admin" does not work, the device may have been previously configured, or the password was set by an IT administrator.
If these do not work, here are a few suggestions: