Konica Minolta Bizhub C258 Factory Reset

To avoid the need for a factory reset in the future, follow these best practices:

Note: On some machines, this is achieved by navigating to Utility -> Administrator Settings -> System Settings. 2. Perform Data Initialization Select . Select [Initialization] .

The initial setup wizard will prompt you for the system language, time zone, and current date.

Select the check box for the data you want to clear. To ensure a complete factory reset, ensure all data boxes, including , are selected. Press the [Start] button. konica minolta bizhub c258 factory reset

If the factory reset is intended for data sanitization (e.g., selling or recycling the copier), or if you are experiencing severe C-FAxx or data-corruption error codes, you must format the internal hard drive.

The following step-by-step guide covers the most common and secure methods to reset the bizhub C258.

The factory reset options on the Konica Minolta bizhub C258 are located within the hidden Service Mode menu. Follow these precise instructions to access the menu and initialize the system. Step 1: Access the Service Mode To avoid the need for a factory reset

Look for the or Reset Settings option (the exact sub-menu naming depends on your firmware version).

Enter using the sequence outlined in Section 3.

If you are encountering specific error codes or need help with the initial network configuration after the reset, Select [Initialization]

.

Ensure you have the active Administrator password. The default password for the Bizhub C258 is typically 1234567812345678 .