Hyt Tc-580 Programming: Software

There are multiple firmware revisions of the TC-580. Using the wrong CPS version can lead to “Invalid Model” or “Codeplug Mismatch” errors. Ensure the software version is compatible with your radio’s firmware.

Download the Prolific or FTDI USB-to-Serial driver matching your cable chip. Run the driver installer as an Administrator. Plug in your USB programming cable.

| Specification | Details | |---|---| | | VHF: 136–174 MHz; UHF: 350–390 MHz, 400–470 MHz | | Channel Capacity | 256 channels (32 zones) | | Channel Spacing | 25 kHz (wide) / 12.5 kHz (narrow) | | Operating Voltage | 7.4V DC | | Battery Options | 1650mAh (standard), 1100mAh, 2000mAh | | Battery Life (5/5/90 duty cycle) | Up to 13 hours (2000mAh battery) | | RF Power Output | VHF: 5W/1W; UHF: 4W/1W | | Dimensions | 117mm × 53mm × 36mm | | Weight | Approx. 287g (with antenna and battery) | | Sensitivity | ≤ 0.25/0.28μV | | Receiver Audio Power Output | 1W | Hyt Tc-580 Programming Software

Do you need to set up advanced features like or Emergency Alarms ?

The software is lightweight but finicky. It was developed in an era when Windows XP and Windows 7 dominated. Here are the ideal requirements: There are multiple firmware revisions of the TC-580

This is usually caused by a poor physical connection. Ensure the 2-pin plug is pushed firmly into the radio. Sometimes the plastic casing of the cable is too thick and needs to be trimmed slightly to sit flush.

This guide serves as a complete resource for anyone seeking to understand, obtain, install, and use the Hyt TC-580 programming software. Whether you are a radio technician, a security team leader, or a hobbyist looking to optimize your fleet, the following sections will walk you through the entire process. Download the Prolific or FTDI USB-to-Serial driver matching

Turn the volume/power knob clockwise to turn the radio on. Ensure the battery is fully charged to prevent the radio from shutting down mid-programming, which can corrupt the firmware.