Press and hold down the Stop/Reset button (red triangle icon).
Release the Power button. The green LED should blink a few times and then remain lit continuously. If the green light is solid, the printer has successfully entered Service Mode. Step 2: Operating the V3200 Reset Software
The software is open, but the printer is not successfully in Service Mode. free resetter canon service tool v320032 fixed
Find the section. Next to Absorber , ensure it is set to Main .
Click ; the printer should print a confirmation page (D=000.0). Safety & Troubleshooting Press and hold down the Stop/Reset button (red
Before you do anything, consider that simply resetting the counter without addressing the physical waste ink pad can lead to ink leaking inside the printer, causing damage. The best practice is to either replace the pad or, at the very least, clean and dry the existing sponge. This guide assumes you are aware of the risks and have made the necessary physical preparations.
Locate the Clear Ink Counter section within the main menu interface. If the green light is solid, the printer
Executes nozzle checks and alignment tests independently of the operating system's print queue.
Close the Service Tool application, turn off the printer using its physical power button, wait 10 seconds, and turn it back on normally. Troubleshooting V3200 Execution Failures
