Before you begin, ensure the following:
Your Canon printer is a workhorse, but eventually, it will stop printing and flash an error code. One of the most common issues is a full ink absorber pad.
Early G-series continuous ink models (G1000, G2000, G3000) How to Put Your Canon Printer into Service Mode Free Resetter Canon Service Tool V3200.32
The power and alarm lights on the printer flash alternately a specific number of times (usually 7 or 8 green/orange blinks).
Right-click on the ServiceTool_V3200.exe file and select . Step 3: Clear the Waste Ink Counter Before you begin, ensure the following: Your Canon
Resetting the counter fixes the digital lock, but it does not physically empty the ink.
Canon programs a digital counter inside the printer’s firmware to estimate when these physical pads will become saturated. When this counter hits 100%, the printer triggers a safety lock. It stops printing to prevent liquid ink from leaking out of the machine and damaging your desk, floor, or internal electronics. Common Symptoms of a Full Waste Ink Counter Right-click on the ServiceTool_V3200
Triggers advanced ink purging cycles that are unavailable through standard computer print drivers.
When this counter reaches 100%, the printer locks down to prevent ink from overflowing onto your desk. The V3200 software communicates with the printer via a USB connection to reset this waste ink counter back to zero, allowing you to resume printing. Important Safety Warning Before You Begin
The software cannot detect your printer unless the hardware is placed into Service Mode first. Follow these exact physical steps:
Some of the commonly reported compatible models include: