Proper USB drivers are essential for any unlocking or flashing operation. These drivers must be compatible with your Windows version (32-bit or 64-bit) and support the Andromax M3Y. Install drivers before connecting your device to ensure proper detection.
Verify that the correct COM Port is still showing at the top of your flashing software interface.
Power off the Andromax M3Y. Insert both the MicroSD card and the new GSM SIM card you wish to use. Firmware Andromax M3y Unlock
Essential for your Windows PC to recognize the MiFi in diagnostic/download mode.
Do not touch the device. The MiFi will automatically reboot once the firmware installation is complete. Method 2: Qualcomm Flash Image Loader (QFIL) Method Proper USB drivers are essential for any unlocking
Open your PC and check under "Ports (COM & LPT)". You should see Qualcomm HS-USB QDLoader 9008 (COMxx) . Step 3: Configure QFIL and Flash the Firmware Launch the QFIL application from your Windows Start Menu.
Keep holding both, and plug the USB cable from the PC into the MiFi. Verify that the correct COM Port is still
The default firmware actively checks the Public Land Mobile Network (PLMN) ID of the inserted SIM card. If the ID does not match Smartfren, the device denies network access.
If your Andromax M3y rejects other SIM cards (e.g., Telkomsel, XL, Indosat), flashing firmware alone remove the network lock. Here are legitimate ways: