Evoko Liso Factory Reset Verified ((link)) Jun 2026

Unplug the or the DC power jack to turn the device completely off. Step 3: Insert USB and Power Cycle

If you cannot access the on-screen menu due to a forgotten PIN, your only option is to use to bypass the software lock entirely. To help resolve your specific issue, please let me know:

Once the factory reset successfully concludes, the screen will display a unique "Liso ID" or a prompt to connect to Evoko Home. To put the device back into service:

If the Evoko Liso is still operational and connected to your network, you can initiate a reset remotely through the Evoko Home management software. Log into your admin portal via your web browser. Navigate to the Rooms or Devices tab. Locate the specific Evoko Liso unit from the device list. Click on the device to open its settings panel. Click the Disconnect or Remove Device button. evoko liso factory reset verified

Plug the prepared USB flash drive into the USB port located on the side or back of the Evoko Liso unit.

Depending on the hardware revision, the presence of the reset file on the USB will automatically trigger a clean wipe, or you will need to gently press a recessed pinhole reset button (located near the USB port) using a paperclip for 5–10 seconds during boot up.

Copy the firmware file onto the USB drive. Do not place it in any folders; keep it in the root directory. 2. Disconnect Power and Network Unplug the or the DC power jack to

Are you running into a specific during the USB boot process, or do you need help setting up the Evoko Home server connection?

To help troubleshoot the specific issue that triggered this reset, let me know: What is your Evoko Liso currently running?

The Liso will now boot into the initial setup screen, ready to be paired with your Evoko Home server. Alternative: Resetting via Admin Console (Without USB) To put the device back into service: If

Disclaimer: A factory reset is irreversible. Ensure you have your configuration credentials available before proceeding. If you need a more tailored guide, please let me know:

How do I perform a firmware reset on an Evoko Liso? - Biamp Cornerstone

The device will automatically flash the firmware and reboot. Do not remove power during this process. Once the screen prompts you for initial setup, carefully remove the MicroSD card. Method 2: The Evoko Home Admin Control Reset