Cwfl-6000 Manual Jun 2026

). Following the CWFL-6000 User Manual ensures the longevity of both the chiller and the expensive fiber laser it protects. Key Specifications Summary Specification Up to 14.5kW Control Precision Water Tank Volume Approx. 40L Refrigerant

: After the system has run for a few minutes, visually inspect all hose connections and fittings for any signs of leakage.

If your shop drops below 0°C, the manual allows up to 30% ethylene glycol + 70% distilled water. Never exceed 30%—it reduces specific heat capacity and cooling efficiency. cwfl-6000 manual

Fill the water tank until the water level gauge needle enters the green zone . 3. Water Pipe Connections

Maintain continuous operation of the chiller and laser pumps to keep water moving. 40L Refrigerant : After the system has run

Connects to the laser cutting/welding head optics.

: Place the chiller in a well-ventilated area, maintaining a clearance of at least 100cm from the air outlet and 50cm from the air inlet for proper airflow. Fill the water tank until the water level

The manual advises against it. Overcooling a smaller laser can cause condensation inside the resonator. Use the CWFL-4000 instead.