Commax Dp-ra01 Installation Manual Link

Once powered on, perform a complete operational check to ensure proper functionality.

2-wire connection (typically requires a separate power source depending on the lock model).

Drill holes at the marks, insert the wall anchors, and secure the bracket tightly using the provided mounting screws. Step 3: Wiring Connections

Align the slots on the back of the DP-RA01 handset with the hooks on the wall bracket. commax dp-ra01 installation manual

Select a flat wall surface inside the premises. The recommended mounting height for the handset is from the floor to the center of the device. This ensures comfortable access for users of average height. Step 2: Installing the Wall Mounting Bracket

Connect terminal on the door station to terminal Line 2 on the master room unit. 2. Connecting an Electric Door Release (Strike Lock)

The DP-RA01 typically uses a . If you are pulling new cables, you will need "Quad Wire" (4 cores). Once powered on, perform a complete operational check

Once the hardware installation is complete, restore power to the system to perform a functional check.

Now, let’s get it on the wall.

The outdoor station connection is generally non-polarized. However, the 12V DC power supply is polarized and must be connected correctly to prevent damage. Step 3: Wiring Connections Align the slots on

✅ – Keep extra wire inside the wall or behind the bracket in case re‑termination is needed.

This comprehensive guide provides detailed, step-by-step instructions for the installation, wiring, and operation of the Commax DP-RA01 audio door phone system. The Commax DP-RA01

| Symptom | Likely Fix | |---------|-------------| | No video | Check 12 V power polarity; verify video wire continuity. | | No call signal | Swap or reseat A/B audio wires. | | Poor night vision | Clean IR lens; ensure no reflective surface nearby. | | Button stuck | Check for debris; loosen mounting bracket slightly. |