Connect the voltage measurement inputs to two phases (e.g., L1 and L2) for standard line-to-line sensing, or phase-and-neutral depending on your specific model variant.
Once programmed, the Computer 8D96 has several display and operating modes:
The most complete version of the document is titled , reference M 981 601 / 98C. circutor computer 8d96 manual full
Units must be properly grounded before power is applied.
: This value is calculated based on the power of the first capacitor step and the CT ratio. It determines the sensitivity for connecting/disconnecting steps. Connect the voltage measurement inputs to two phases (e
Always ensure the current transformer (CT) secondary is short-circuited before disconnecting to prevent high voltage buildup. Power Supply:
Are you dealing with any specific on the display? : This value is calculated based on the
: Standard 96x96 mm flush-mounting panel format.
Common voltage feed line for the output relays.
What is the (in kvar)?