Canon Service Tool v5306 (5.306son versiyon 2020) 5B00 -客服
A dialog box stating "A function was carried out" should appear, and the printer will briefly feed a sheet of paper or cycle its carriage to confirm acceptance.
: MX320, MX340, MX390, MX470, MX490, MX530, and MX920. Pixma MG Series : MG3600, MG5500, MG5600, and MG5700 series. canon service tool v5306
Release both buttons. If successful, the power light will remain solid green.
: With the printer finally recognized, the user navigates to the Ink Absorber Counter section. With one click on the Set button for the Main absorber, the digital counter drops back to zero. Canon Service Tool v5306 (5
Turn the printer back on normally. The error code will disappear. Crucial Troubleshooting and Error Codes
Canon printers are built with internal counters that track ink consumption, page counts, and waste ink pad saturation. When the waste ink absorber pads—the physical sponges at the bottom of the printer—reach full capacity, the printer triggers a hardware lock to prevent ink leaks. Release both buttons
It generally does not work with "disposable" or entry-level models like the E400, MG24xx, or MG25xx series.
While resetting the electronic counter fixes the software lockout, it .
The printer uses an internal electronic counter to estimate when these pads are saturated. Once the counter hits 100%, the printer locks down for safety. The v5306 version is highly sought after because it adds support for newer printer models while maintaining compatibility with older legacy devices. Key Capabilities
The software cannot find the printer. This means either the printer is not in Service Mode, the USB cable is faulty, or another printer driver is hogging the communication port. Try restarting the PC and changing USB ports.