: "No flash in device" (ID: 0xFF,0xFF...). This typically suggests a controller malfunction or that the utility version is incompatible with that specific chip.
Repacking the AU87101A controller is a viable method for reviving "dead" USB flash drives caused by firmware corruption or logical errors. While the process effectively restores the device to a usable state, it acts as a factory reset, erasing all user data.
This is the most critical step. Using the wrong tool can permanently damage your USB drive. Your goal is to verify the controller model.
If you want, I can:
You are the target user if any of these scenarios sound familiar:
Before running any Ufdisk or Alcor software, you must ensure your drive actually uses an Alcor Micro controller chip. Running the incorrect software on a different controller brand (like Phison, Silicon Motion, or ChipsBank) can permanently brick the hardware.
Remember: always back up first (if possible), never use on production systems, and when you finally see that 256MB drive appear in Windows Explorer – celebrate the small victory of keeping old tech alive. au87101a ufdisk repack
Now I will write the article in a clear, informative, and well-structured manner. is a comprehensive guide on the Alcor Micro AU87101A UFdisk controller, covering its identification, common issues, and solutions, including the usage of various "repack" software.
When complete, Windows will instantly discover two distinct components: a virtual hardware read-only CD-ROM drive and a regular read-and-write flash partition. ⚠️ Troubleshooting Common Errors
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. IC Alcor Micro - USBDev.ru : "No flash in device" (ID: 0xFF,0xFF
Right-click the application executable ( AlcorMP.exe ) and choose Run as Administrator .
+--------------------------------------------------------+ | ALCORMP SETUP | +--------------------------------------------------------+ | | | [Flash Type] -> Verify Flash ID Matching | | [Mode] -> Select "Normal Disk" / "Password" | | [Other] -> Fix Power Selection to 200mA | | | +--------------------------------------------------------+ Flashing the Firmware Save your adjusted settings to return to the dashboard.
Mass production tools are highly hardware-specific. Running software designed for an AU6983 controller on an AU87101A controller will result in an error or a failed flash. You must verify the internal components of your drive using software extractors. Using ChipGenius or Flash Drive Information Extractor While the process effectively restores the device to