Adjustment Program Epson L3210 Jun 2026

: Check the boxes next to Main pad counter , Platen pad counter , and Ink system pad counter (if applicable). Click the Check button. The software will display your current percentage and points.

: Open AdjProg.exe and click the Select button. Choose "L3210" under the Model Name and click OK .

The right Adjustment Program for the Epson L3210 should offer the following capabilities: Adjustment Program Epson L3210

Scroll down the list, select , and click OK . Step 4: Reading and Resetting Check the box next to Main pad counter .

. It was a utilitarian, grey-windowed piece of software that looked like it belonged in 1998. With the printer connected via USB, Elias launched the : Check the boxes next to Main pad

Purchase a replacement Epson L3210 waste ink pad assembly online. It is a small plastic box located at the rear bottom of the printer, held in place by a single screw. Replacing it takes less than five minutes.

: Check the boxes for "Main pad counter," "Platen pad counter," and "Ink system pad counter," then click to see the current usage (it will likely be at 100%). Initialize : Check the boxes again and click Initialize to reset the counters. : Open AdjProg

Route the internal waste ink tube out through the back of the printer housing into a small external plastic bottle for easy disposal. Troubleshooting Common Connection Errors

The printer will refuse to execute any further print, scan, or copy commands until the counter is cleared.

: Click on Particular Adjustment Mode .

: Click the Select button and choose L3210 from the Model Name dropdown. Set the Port to Auto Selection or the specific USB port connected to your printer.